How to Turn on Bluetooth Headphones without Power Button?

Introduction

Bluetooth headphones are very trusty companions for every listening we do. The portability and less hassle of wires made them popular. But in reality, most users complain about the power button or the Bluetooth connectivity.

Here, we’ll discuss the most common issue we seek a solution to, How to turn on Bluetooth headphones without a power button?  Sometimes, the power button gets stuck, broken or damaged. Our instructions will help to fix that issue. So let’s get started.

How to Turn on Bluetooth Earbuds without Touch Control?

Touch control is the main theme of TWS. The TWS has no power button to turn on; it comes with a case, and there it gets the necessary charge and unplugging from the case makes it turn on.

Now, some TWS only get turned on by touching the sensor. But imagine the touch is not working for them, and now, how do you turn the TWS on? Well, TWS doesn’t come with any button, so you need to have a customized TWS to turn it on for a power button to turn on.

Get your Bluetooth earbuds Here

Therefore, follow these steps :

– Check the manual book and see if there is any solution for it.

– Check the battery of the TWS case. Nowadays, most of the TWS cases show the battery life of it and wireless earbuds.

– Now, the battery is showing, which means no charge-related issues. If it doesn’t show the battery or doesn’t give any sign of charging, then there are no charge-related issues there.

– Most of the TWS comes with a dedicated app for the phones. Go to the application and see if there is any turn-on option or pairing option.

– Finally, if these procedures don’t pay off, the TWS is likely dead. Try to reset the TWS according to the manual book. Or take it to professionals who will work on circuits.

Fixing the Power Issue of Neckbands

Well, you may not be familiar with the term, but it’s the earbud we know. The left and right earbuds have connections with a comfortable wire. Yet it is a Bluetooth earbud. Every neckband has a power button to turn the earbuds on and prepare them for pairing with a device.

Now, if the power button doesn’t work for the neckband, how do you turn it on? Because it doesn’t have an automatic turn like TWS and no app connections. That’s why we are here to fix earbuds without touch control.

– First, connect the neckband earbud with the charger. See if it is charging.

– Now, the charging light is on, which means the earbud is charging. No charging issues are there.

– So the battery is okay; there is no need to disassemble the battery part. Use a paper knife to disassemble the part with the power button and volume up/down buttons.

– After disassembling the frame, you can see the PCB section. Check all the soldering conditions of the connections.

– There must be a cut-out wiring part, so if you find any, re-solder the wire.

– If there are no loose wires, then the PCB board has some issues. Fixing PCB boards is a work for professionals.

Re-solving the Power Button Stuck 

How to fix a stuck button on headphones is another common query from users lately. All the Bluetooth earphones have a Bluetooth on/off or a power button. Maybe some dirt got into the button, or the button is broken inside. So that’s why it is stuck. Let’s try to get out of this button-stuck issue.

– Wiggle the stuck button gently. See if you can untuck it.

– Remember, too much force can damage the writing or internal switch.

– Now, disassemble the part to see the button condition from the inside.

– Once the disassembly is done, apply alcohol with a soft dry cloth. Gently rub over the button and the groove around it. It helps to prevent debris.

– Also, you’ll see a tiny hole beside the underside of the power button. Pop in a paper clip or toothpick; the power will pop up. Gently scratch inside the hole and, finally, push the button in.

– In most cases, this cleaning helps to unstick the power button. Otherwise, you must get a new or used button to replace it.

Fixing the Bluetooth Headset Turn on Issue After Charging 

Sometimes, after charging for long hours, the Bluetooth headsets don’t turn on. So here we are, combining a couple of solutions to make the headset respond.

– First, press and hold the power key for a minute.

– Now press the power key three times and hold it for a few seconds.

– Now, the power light should turn on, and the headset should work correctly.

– If the headset was paired with a device before and the Bluetooth is on now in that device, then the headset will pair with the device automatically.

So, don’t get panicked if the Bluetooth headset stops responding after charging. Just follow this procedure, and the headset will be live again.

Have you ever about Tranya headphones? Get more info here.

FAQ

 Why do Bluetooth headphones stop turning on?

– For several reasons, maybe the headphones fell from the hand, and the wiring got unsoldered. Or the Bluetooth button is not working. Or the battery is not charging or damaged. Well, it’s natural for Bluetooth headphones; if the battery dies, you can replace them. Even soldering the wire seems okay. Also, you can replace the power button too.

How can you turn on TWS if there is no power on switch or no touch working? 

– TWS should get turned on while charging in the case. But if your TWS is having its charge but not turning on, the touch sensor probably needs to be fixed. The touch sensor may have lost its connection with the PCB board. Also, sometimes, it’s software-related problems.

Read : Does Sony Xm4 have a mic?

Conclusion 

The Bluetooth headphones often need this kind of troubleshooting. Well, no matter how costly or brand Bluetooth headphones you get, issues will always come. So keep your patience, and keep the headsets clean and always. Debris is the biggest threat to TWS, headsets and neckbands.